Differential pressure transducer DMU/A

CHARACTERISTICS

Pressure type
differential
Technology
membrane
Output signal
analog
Other characteristics
IP65
Process temperature
Max.: 50 °C (122 °F)

Min.: 0 °C (32 °F)

Pressure range
Max.: 5,000 Pa (0.73 psi)

Min.: -5,000 Pa (-0.73 psi)

DESCRIPTION

The pressure transducer DMU/A measures the low, high and differential pressure between the two pressure inputs and tranforms the measured value into a linear output signal 0-10 V or 4-20 mA. There are 8 different pressure ranges for selection, which can be switched by an innovative DIP switch technology. The output attenuation (0 s / 1 s / 5 s / 10 s) can also be determined by DIP switch. For a manual calibration of the zero point on site the pressure transducer runs a zero point adjustment in keystroke. An additional offset controller can be used for fine calibration up to ±5% relative to the selected measurement range.