SINGLE LADDER / ROOF / WITH SAFETY CAGE

Characteristics

  • Type:

    single

  • Product applications:

    roof

  • Other characteristics:

    with safety cage

Description

MEISER GRP ladders meet NFE 85-010 and EN 131 standards and consist of the following parts:

Beams of square tubing (with coupling system from 6 m length) and end caps at the top.
Ladder steps of corrugated non-skid rounded sections, minimum gap from wall 225 mm

Depending on use the following accessories and add-ons are available:

Ground anchoring
Wall bracket/s
Safety basket from 3 m length with 5 vertical supporting sections (gap 1250 mm)
Design as requested:
a) With lateral opening for right or left exit.

b) With exit expansion from 400 mm safety basket diameter to 750 mm gap between fastening means on the ladder beams.

c) With 700 mm wide opening for front exit.

Metal reinforced expanding exit aid
Platform with safety railing and wall fastening to relevant standard from 6 m length.

Platform
Ladders over 6 m long must be of at least two displaced sections separated by a platform. Access from the lower ladder part to the platform is via a safety basket with exit opening left or right.

The platform must have safety railing with a base and sectional grating.